PluginSolarCalculator.com

THE SOLAR CENTRE

The Solar Centre 910W Plug-In Solar Starter Kit (2 Panel Kit)

Stock status : In stock

Explore this kit
The Solar Centre 910W Plug-In Solar Starter Kit (2 Panel Kit)

The Solar Centre 910W Plug-In Solar Starter Kit is a 910W two-panel plug-in solar kit supplied by The Solar Centre.

This kit combines two 455W Astronergy bifacial N-type TOPCon panels with a 799VA APsystems EZ1-M dual-MPPT microinverter and an adjustable mounting system for ground installations.

Price including delivery: £580

ENA compliance

Compliance

The Solar Centre 910W Plug-In Solar Starter Kit (2 Panel Kit) has been assessed by the Energy Networks Association and was marked as ‘Compliant’ in the Plug-in Solar category of the ENA Type Test Register on under reference number THESO/21438/V1.

View ENA record for this kit

Registration

If you buy this kit you must notify your Distribution Network Operator (DNO) by registering it at myplugin.solar within 28 days of installation. Use ENA reference number THESO/21438/V1 when registering to find and select the correct approved kit.

Read our DNO registration guide

What’s included

Panels

  • 2 × 455W Astronergy bifacial panels
  • 910W total panel capacity
  • Bifacial TOPCon N-type
  • 22.8% module efficiency

Microinverter

  • APsystems EZ1-M
  • 799VA maximum AC output
  • 2 PV input channels
  • 2 independent MPPTs

Mounting system

  • Suitable for ground mounting
  • Adjustable angle from 0° to 90°

AC & DC cables

  • 4m AC cable
  • 2m DC cables

Warranty

  • 25 year panel product warranty
  • 12 year microinverter warranty
  • 12 year mount warranty

Pros & cons

Pros

  • Independent panel control: Two independent MPPTs allow the microinverter to manage each panel separately, helping when the panels receive different amounts of sunlight.
  • Wide tilt adjustment: The supplied ground mounting brackets adjust from 0° to 90°, giving you more flexibility to position the panels than many other adjustable mounts offer.
  • Long component warranties: The panel product warranty is 25 years, and the microinverter and mount are covered for 12 years each.

Cons

  • Ground mounting only: The supplied brackets are designed for ground installation. Consider another kit if you need wall or balcony mounting.
  • Cheaper kits with similar specs: At £580 delivered, this kit is competitively priced, but the City Plumbing DMEGC 950W HiFlow PRO kit costs £100 less at £480 delivered. It offers 40W more panel capacity and also comes with a dual-MPPT microinverter and adjustable mounting.

Detailed kit specification

The full known specifications for the solar panels and microinverter supplied with The Solar Centre 910W Plug-In Solar Starter Kit (2 Panel Kit) are shown below.

Solar panels

Manufacturer
Astronergy
Quantity
2 panels
Rated power
455W per panel (910W total)
Technology
Bifacial TOPCon N-type
Dimensions
176 × 113 × 3cm per panel
Weight
24.5kg per panel
Module efficiency
22.8%
Year 1 degradation
1%
Annual degradation
0.4%
DC cable length
2m

Microinverter

Manufacturer
APsystems
Model
EZ1-M
Maximum output
799VA
PV input channels
2
Independent MPPTs
2
Weight
2.8kg
Peak efficiency
96.7%
Start-up voltage
Not specified by supplier
Connectivity
Wi-Fi, Bluetooth
AC cable length
4m

Before you buy

A few practical things to check before choosing where and how to install this kit.

Electrical safety

Before using this kit, check that the circuit supplying your socket has suitable RCD protection. Electrical Safety First recommends at least Type A bidirectional protection and advises upgrading Type AC protection before use

Read our safety guidance

Installation & planning

Each panel measures 176 × 113 cm and weighs 24.5 kg. The supplied AC cable is 4 m long. Check that your chosen location can support the panels, allows a suitable cable route and meets any applicable planning restrictions.

Read our planning guide

Ballast

If you’re installing the kit freestanding, you’ll need ballast to weigh down the mounting frame and help prevent movement or uplift. Follow the manufacturer’s instructions for the required ballast weight and positioning.

View ballast blocks at Wickes

Cable protection

If the AC cable runs through an exposed area, split conduit can provide additional protection. Because the plugs and connectors are moulded onto the cable, split conduit can be fitted around it without needing to remove them.

Where to buy

The Solar Centre 910W Plug-In Solar Starter Kit (2 Panel Kit) is available to buy from The Solar Centre.

Retailer

Prices and availability can change. Always confirm the complete kit specification and current price with the retailer before buying.

Estimate savings and payback

Estimated solar generation, annual savings and payback period for The Solar Centre 910W Plug-In Solar Starter Kit (2 Panel Kit) depend on where you live, how the kit is positioned, and crucially, how much of the solar electricity your household uses.

Get a tailored estimate

We’ll pre-fill the calculator with this kit’s 910W panel capacity and £580 price. Just enter your postcode, panel setup and a few details about your household and electricity use to estimate generation, savings and payback.

Use the plug-in solar calculator