PluginSolarCalculator.com

ZENDURE

Zendure SolarFlow 800 2-Panel Wall Mount Plug In Solar Kit

Stock status : Out of stock

Explore this kit
Zendure SolarFlow 800 2-Panel Wall Mount Plug In Solar Kit

The Zendure SolarFlow 800 2-Panel Wall Mount Plug In Solar Kit is a 920W two-panel plug-in solar kit supplied by Zendure.

This kit combines two 460W bifacial N-TOPCon monocrystalline panels with an 800VA Zendure SolarFlow 800 microinverter, adjustable wall-mount brackets and extension cables for wall installation.

Price including delivery: £799
View at Zendure

ENA compliance

Note: ENA ref ZENDU/21470/V1/A1 covers the SolarFlow 800 wall mount kit with MC4 extension cables. ENA ref ZENDU/21473/V1/A1 covers the standard SolarFlow 800 wall mount kit minus extension cables.

Compliance

The Zendure SolarFlow 800 2-Panel Wall Mount Plug In Solar Kit has been assessed by the Energy Networks Association and was marked as ‘Compliant’ in the Plug-in Solar category of the ENA Type Test Register on under reference number ZENDU/21470/V1/A1.

View ENA record for this kit

Registration

If you buy this kit you must notify your Distribution Network Operator (DNO) by registering it at myplugin.solar within 28 days of installation. Use ENA reference number ZENDU/21470/V1/A1 when registering to find and select the correct approved kit.

Read our DNO registration guide

What’s included

Panels

  • 2 × 460W bifacial panels
  • 920W total panel capacity
  • Bifacial N-TOPCon monocrystalline
  • 23.02% module efficiency

Microinverter

  • Zendure SolarFlow 800
  • 800VA maximum AC output
  • 2 PV input channels
  • 2 independent MPPTs

Mounting system

  • Suitable for wall mounting
  • Adjustable mounting angle

AC & DC cables

  • 3m AC cable
  • 4 × 3m MC4 DC extension cables

Warranty

  • 12 year panel workmanship warranty
  • 25 year panel performance warranty
  • 12 year microinverter warranty

Pros & cons

Pros

  • Good low-light performance: At 14V, the microinverter has the lowest specified start-up voltage of any kit currently listed on our site, helping it begin operating at lower panel voltages in weaker light, such as early morning or cloudy conditions.
  • Independent MPPTs and high-efficiency panels: Two independent MPPTs manage each panel separately, helping reduce losses when one panel is shaded or facing a different direction. The supplied 460W bifacial N-TOPCon panels also offer 23.02% efficiency.
  • Strong supplier-backed warranty: Both the SolarFlow 800 inverter and solar panels are covered by 12-year Zendure warranties, with the panels also carrying a 25-year performance warranty.

Cons

  • Cheaper dual-MPPT kits available: At £799, this kit costs considerably more than complete dual-MPPT alternatives such as the PowerXpress 920W kit at £599 and the City Plumbing 950W HiFlow PRO kit at £480, both with wall mounting brackets included.
  • Sale price may increase: Zendure currently advertises £799 as a sale price against a regular price of £849. The price could rise when the offer ends.
  • Short AC cable: The supplied 3m AC cable may limit where you can position the kit while reaching a suitable socket. Many other kits include a 4m or 5m cable.

Detailed kit specification

The full known specifications for the solar panels and microinverter supplied with the Zendure SolarFlow 800 2-Panel Wall Mount Plug In Solar Kit are shown below.

Solar panels

Manufacturer
Not specified by supplier
Quantity
2 panels
Rated power
460W per panel (920W total)
Technology
Bifacial N-TOPCon monocrystalline
Dimensions
172 × 113 × 3cm per panel
Weight
25.5kg per panel
Module efficiency
23.02%
Year 1 degradation
Not specified by supplier
Annual degradation
Not specified by supplier
DC cable length
3m

Microinverter

Manufacturer
Zendure
Model
SolarFlow 800
Maximum output
800VA
PV input channels
2
Independent MPPTs
2
Weight
5kg
Peak efficiency
Not specified by supplier
Start-up voltage
14V
Connectivity
Wi-Fi, Bluetooth
AC cable length
3m

Before you buy

A few practical things to check before choosing where and how to install this kit.

Electrical safety

Before using this kit, check that the circuit supplying your socket has suitable RCD protection. Electrical Safety First recommends at least Type A bidirectional protection and advises upgrading Type AC protection before use

Read our safety guidance

Installation & planning

Each panel measures 172 × 113 cm and weighs 25.5 kg. The supplied AC cable is 3 m long. Check that the wall and fixings can support the panels, and that your chosen location allows a suitable cable route and meets any applicable planning restrictions.

Read our planning guide

Cable protection

If the AC cable runs through an exposed area, split conduit can provide additional protection. Because the plugs and connectors are moulded onto the cable, split conduit can be fitted around it without needing to remove them.

View split conduit on Amazon UK (paid link)

Where to buy

The Zendure SolarFlow 800 2-Panel Wall Mount Plug In Solar Kit is listed by Zendure at £799 including delivery, but is currently out of stock.

Direct from kit supplier

Prices and availability can change. Always confirm the complete kit specification and current price with the retailer before buying.

Estimate savings and payback

Estimated solar generation, annual savings and payback period for the Zendure SolarFlow 800 2-Panel Wall Mount Plug In Solar Kit depend on where you live, how the kit is positioned, and crucially, how much of the solar electricity your household uses.

Get a tailored estimate

We’ll pre-fill the calculator with this kit’s 920W panel capacity and £799 price. Just enter your postcode, panel setup and a few details about your household and electricity use to estimate generation, savings and payback.

Use the plug-in solar calculator

Similar plug-in solar kits

The following kits have a similar panel capacity and spec to the Zendure SolarFlow 800 2-Panel Wall Mount Plug In Solar Kit.

View all plug-in solar kits