PluginSolarCalculator.com

SOLARFY

Solarfy Solo 455W Plug-in Solar Kit (SFY-SOLO-455-BM)

Stock status : In stock

Explore this kit
Solarfy Solo 455W single-panel plug-in solar kit with microinverter and mounting hardware

The Solarfy Solo 455W Plug-in Solar Kit (SFY-SOLO-455-BM) is a 455W single-panel plug-in solar kit supplied by Solarfy.

This kit combines one JA Solar 455W bifacial solar panel with an 800VA Hoymiles HMS-800-2WB HiFlow Pro microinverter and a fixed 20° mounting system suitable for ground or flat-roof installation.

Price including delivery: £399

ENA compliance

Compliance

The Solarfy Solo 455W Plug-in Solar Kit (SFY-SOLO-455-BM) has been assessed by the Energy Networks Association and was marked as ‘Compliant’ in the Plug-in Solar category of the ENA Type Test Register on under reference number SOLAW/21640/V1.

View ENA record for this kit

Registration

If you buy this kit you must notify your Distribution Network Operator (DNO) by registering it at myplugin.solar within 28 days of installation. Use ENA reference number SOLAW/21640/V1 when registering to find and select the correct approved kit.

Read our DNO registration guide

What’s included

Panels

  • 1 × 455W JA Solar panel
  • 455W total panel capacity
  • Bifacial TOPCon N-Type
  • 22.8% module efficiency

Microinverter

  • Hoymiles HMS-800-2WB HiFlow Pro
  • 800VA maximum AC output
  • 2 PV input channels
  • 2 independent MPPTs

Mounting system

  • Suitable for ground or flat roof
  • Fixed 20° mounting angle

AC & DC cables

  • 5m AC cable
  • 2m DC cable

Warranty

  • 12 year microinverter warranty
  • 25 year panel product warranty
  • 12 year mount warranty

Pros & cons

Pros

  • High-efficiency bifacial panel: The supplied JA Solar bifacial panel delivers 22.8% module efficiency and can also generate from light reaching its rear surface.
  • Practical mounting design: The coated-steel mounting frame is easy to set up, while its flat, open design makes it straightforward to add ballast.

Cons

  • Fixed mounting angle: The supplied frame uses a fixed 20° angle, so you cannot adjust the panel tilt to suit the season or installation position.
  • Dual-MPPT offers little benefit with one panel: Only one of the microinverter’s two inputs is used in this single-panel setup, so the second independent MPPT provides no additional generation benefit. The City Plumbing DMEGC 475W kit uses a single-MPPT microinverter and offers 20W more panel capacity for £63 less.

Detailed kit specification

The full known specifications for the solar panels and microinverter supplied with the Solarfy Solo 455W Plug-in Solar Kit (SFY-SOLO-455-BM) are shown below.

Solar panels

Manufacturer
JA Solar
Quantity
1 panel
Rated power
455W per panel (455W total)
Technology
Bifacial TOPCon N-Type
Dimensions
176 × 113 × 3cm per panel
Weight
22kg per panel
Module efficiency
22.8%
Year 1 degradation
1%
Annual degradation
0.4%
DC cable length
2m

Microinverter

Manufacturer
Hoymiles
Model
HMS-800-2WB HiFlow Pro
Maximum output
800VA
PV input channels
2
Independent MPPTs
2
Weight
3.2kg
Peak efficiency
96.7%
Start-up voltage
22V
Connectivity
Wi-Fi, Bluetooth
AC cable length
5m

Before you buy

A few practical things to check before choosing where and how to install this kit.

Electrical safety

Before using this kit, check that the circuit supplying your socket has suitable RCD protection. Electrical Safety First recommends at least Type A bidirectional protection and advises upgrading Type AC protection before use

Read our safety guidance

Installation & planning

The panel measures 176 × 113 cm and weighs 22 kg. The supplied AC cable is 5 m long. Check that your chosen location can support the panels, allows a suitable cable route and meets any applicable planning restrictions.

Read our planning guide

Ballast

If you’re installing the kit freestanding, you’ll need ballast to weigh down the mounting frame and help prevent movement or uplift. Follow the manufacturer’s instructions for the required ballast weight and positioning.

View ballast blocks at Wickes

Cable protection

If the AC cable runs through an exposed area, split conduit can provide additional protection. Because the plugs and connectors are moulded onto the cable, split conduit can be fitted around it without needing to remove them.

Where to buy

The Solarfy Solo 455W Plug-in Solar Kit (SFY-SOLO-455-BM) is available to buy directly from Solarfy.

Direct from kit supplier

Prices and availability can change. Always confirm the complete kit specification and current price with the retailer before buying.

Estimate savings and payback

Estimated solar generation, annual savings and payback period for the Solarfy Solo 455W Plug-in Solar Kit (SFY-SOLO-455-BM) depend on where you live, how the kit is positioned, and crucially, how much of the solar electricity your household uses.

Get a tailored estimate

We’ll pre-fill the calculator with this kit’s 455W panel capacity and £399 price. Just enter your postcode, panel setup and a few details about your household and electricity use to estimate generation, savings and payback.

Use the plug-in solar calculator