PluginSolarCalculator.com

INSTAGROUP

InstaGen ONE 870W plug-in solar kit (2 × 435W panels)

Stock status : In stock

Explore this kit
InstaGen ONE 870W two-panel plug-in solar kit

The InstaGen ONE 870W plug-in solar kit (2 × 435W panels) is an 870W two-panel plug-in solar kit supplied by InstaGroup.

This kit combines two 435W bifacial TOPCon N-Type solar panels with an 800VA Hoymiles HF-800-WB HiFlow microinverter and an adjustable mounting system suitable for ground-mounted installations only.

Price including delivery:£599

ENA compliance

Compliance

The InstaGen ONE 870W plug-in solar kit (2 × 435W panels) has been assessed by the Energy Networks Association and was marked as ‘Compliant’ in the Plug-in Solar category of the ENA Type Test Register on under reference number INSTA/21105/V1/A1.

View ENA record for this kit

Registration

If you buy this kit you must notify your Distribution Network Operator (DNO) by registering it at myplugin.solar within 28 days of installation. Use ENA reference number INSTA/21105/V1/A1 when registering to find and select the correct approved kit.

Read our DNO registration guide

What’s included

Panels

  • 2 × 435W bifacial panels
  • 870W total panel capacity
  • Bifacial TOPCon N-Type
  • 22.3% module efficiency

Microinverter

  • Hoymiles HF-800-WB HiFlow
  • 800VA maximum AC output
  • 1 PV input channel
  • 1 independent MPPT

Mounting system

  • Suitable for ground mounting only
  • Adjustable from 20° to 35°

AC & DC cables

  • 5m AC cable
  • 1.1m DC cable

Warranty

  • 1 year product warranty

Pros & cons

Pros

  • High-efficiency bifacial panels: The supplied bifacial TOPCon N-Type panels can generate from light reaching both their front and rear surfaces and deliver an excellent 22.3% module efficiency.
  • Adjustable ground mount: The supplied ground-mounting frame has an adjustable tilt from 20° to 35°, allowing you to adjust the panel angle for your installation.

Cons

  • Panels are not independently managed: With a single MPPT, the microinverter has to manage both panels together, so one panel receiving less sunlight can hold back the performance of the pair. This makes the kit better suited to setups where both panels can face the same direction.
  • Not the cheapest two-panel option: At £599, the kit is competitively priced based on the current market, but lower-cost two-panel plug-in solar kits are available.
  • Short warranty: InstaGen only offer a 1 year product warranty with this kit, which is much shorter than the warranties offered with most other plug-in solar kits on the market.

Detailed kit specification

The full known specifications for the solar panels and microinverter supplied with the InstaGen ONE 870W plug-in solar kit (2 × 435W panels) are shown below.

Solar panels

Manufacturer
Not specified by supplier
Quantity
2 panels
Rated power
435W per panel (870W total)
Technology
Bifacial TOPCon N-Type
Dimensions
172 × 113 × 3cm per panel
Weight
25.1kg per panel
Module efficiency
22.3%
Year 1 degradation
1%
Annual degradation
0.4%
DC cable length
1.1m

Microinverter

Manufacturer
Hoymiles
Model
HF-800-WB HiFlow
Maximum output
800VA
PV input channels
1
Independent MPPTs
1
Weight
2.1kg
Peak efficiency
97%
Start-up voltage
22V
Connectivity
Wi-Fi, Bluetooth
AC cable length
5m

Before you buy

A few practical things to check before choosing where and how to install this kit.

Electrical safety

Before using this kit, check that the circuit supplying your socket has suitable RCD protection. Electrical Safety First recommends at least Type A bidirectional protection and advises upgrading Type AC protection before use

Read our safety guidance

Installation & planning

Each panel measures 172 × 113 cm and weighs 25.1 kg. The supplied AC cable is 5 m long. Check that your chosen location can support the panels, allows a suitable cable route and meets any applicable planning restrictions.

Read our planning guide

Ballast

If you’re installing the kit freestanding, you’ll need ballast to weigh down the mounting frame and help prevent movement or uplift. Follow the manufacturer’s instructions for the required ballast weight and positioning.

View ballast blocks at Wickes

Cable protection

If the AC cable runs through an exposed area, split conduit can provide additional protection. Because the plugs and connectors are moulded onto the cable, split conduit can be fitted around it without needing to remove them.

Where to buy

The InstaGen ONE 870W plug-in solar kit (2 × 435W panels) is available to buy from Amazon UK, Currys and Maplin.

Major UK retailers

Prices and availability can change. Always confirm the complete kit specification and current price with the retailer before buying.

Estimate savings and payback

Estimated solar generation, annual savings and payback period for the InstaGen ONE 870W plug-in solar kit (2 × 435W panels) depend on where you live, how the kit is positioned, and crucially, how much of the solar electricity your household uses.

Get a tailored estimate

We’ll pre-fill the calculator with this kit’s 870W panel capacity and £599 price. Just enter your postcode, panel setup and a few details about your household and electricity use to estimate generation, savings and payback.

Use the plug-in solar calculator